Incinerators     MultiZon INCINERATOR for batch operation MZ     For: solid & liquid waste Capacity range: 400 kg/day and 800 kg/day           The MZ models are a further development of the reliable and successful “ MultiZon” incinerators. Application The MZ range serves to incinerate waste materials and production residues. There are two sizes available, with daily throughput capacities of approximately 400 kg/day and 800 kg/day. The unit has been conceived for batch operation with manual charging. This means that the unit is charged once per batch and then the combustion of the whole waste material is automatic and does not require any further operator attendance. For this reason, the unit is particularly suitable for the incineration of hospital waste and for the disposal of smaller amounts of waste materials within industry and trade. For waste with a high humidity like animal carcasses, waste from the kitchen or catering MZ 10 ws develloped. As an option a liquid injection system is available. Benefit With the MZ unit, the waste disposal can be carried out on-the-spot. Trough the incineration, the amount of material will be reduced to about 3% by volume and to about 12% by weight. Correspondingly, the costs for transportation and disposal will be reduced. It makes sence to utilize the energy contained in the waste. With a heat exchanger, hot water can be produced. One is independent with a MZ unit. Independent with respect to the disposal of waste materials and more independent with regard to the provision of energy. Multizonal combustion The essential difference between a multistage, "multizonal" combustion and the conventional combustion is the fact, that the various process stages evolve separately, both in time and with regard to location. Thus each partial process is controlled and optimized individually. The result is a stable combustion, which is practically independent of the composition of the fuels and is low in noxious substances and smoke-free. Environmentally acceptable Waste disposal must be environmentally acceptable. This high requirement is met by the multizonal combustion: • The low air flow in the primary chamber avoids the dragging along of solid particles practically completely. The dust emission is therefore exceedingly low in comparison with conventional incinerators. • Thanks to the particular design of the guaranteed conditions (temperature and residence time), virtually ideal incineration end products are obtained. The combustion is free of soot. • The ash remaining in the primary chamber is absolutely sterile after the combustion. Losses trough the firing bed can be excluded.         MZ 08   Primaliry for: solid waste Burning capacity: 100 kg/h Daily throughput: 800 kg/day                 MZ 10   Primaliry for: solid waste Burning capacity: 100 kg/h Daily throughput: 800 kg/day       FUNCTIONAL PRINCIPLE   MZ 8   MZ 8 R with ram feeder MZ 10         + Bildzoom   + Bildzoom + Bildzoom