JOSEPH EGLI AG switzerland, incineration plants with rotary kiln + static incinerator; Verbrennungsanlagen

Incineration plants

for ANIMAL CARCASSES
with static incinertion furnace for continuous operation

ACI

Series ACI (Animal Carcasses) ovens for continuous operation are suitable for animal carcasses.

FIELD OF APPLICATION

Waste characteristics:	Type of waste:	animal carcasses
	Heating value:	approx. 4 MJ/kg
	Moisture:	approx. 70%
	Density:	approx.700 kg/m3

Capacity range:	Thermal:	1'000 kW / 2'000 kW
Capacity range:	Volume (For Hu of 15 MJ/kg)	500 kg/h / 1'000 kg/h

GENERAL

The plant pictured above serves to dispose of diseased and infected cattle. It is operated on behalf of the state, but on a private basis.
This special low-cost plant was developed in the interest of keeping the disposal costs as low as possible. Both the electro-mechanical equipment and the infrastructure are reduced to the minimum, while legal requirements are satisfied.
The plant is offered in two sizes, with capacities of 500 kg/h or 1000 kg/h, permitting to dispose of one or two complete cattle carcasses per hour, respectively. It can be operated during 24 hours each day.
A heat recovery system has been renounced upon in the above example because no utilization possibility was available in the immediate vicinity. However, a recovery of the heat should be considered under all circumstances because substantial quantities of energy are concerned here and only a relatively minor additional investment is required for the purpose.

SYSTEM DESCRIPTION

	Charging
	Combustion and post-combustion
	Reduction of the flue gas temperature
	Flue gas cleaning
	Control

TECHNICAL DATA

Model		ACI 1	ACI 2
Capacity
Thermal capacity	kW	1000	2000
Throughput volume	kg/h	500	1000

for further technical data

We look back at many years of experience in building incineration plants for animal carcasses. Depending on your requirements and the size of the carcasses we are in a position to offer proven solutions based on static, rotating or oscillating furnaces. Charging and ash discharging can be automated to large extent. Well-estabilished solutions are also available for heat recovery purposes. Filter systems and computer feedback-controlled processes as well as monitoring systems ensure that legal requirements are complied with.